All Products from Richmond Industries
In this section we have listed all our load cell products. Yes, absolutely everything, including load cells, load links, load cell amplifiers, load cell junction boxes, connecting cables, fixing accessories, the lot. There is no filtering so just scroll through and see if there’s something you like.
STILL not found what you’re looking for?
Call us on +44 (0)1189 310 396. We are happy to undertake bespoke customer projects on request, and would be happy to discuss your specific requirements. We look forward to hearing from you!
-
Our Amp9 Instrument is an "All-in-One" Display Controller, a 6 digit load cell Panel Meter with options for Switching and Analogue output. -
Our Amp4 Advanced is another handy little battery-powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. The USB port provides configuration, calibration, and live logging functionality. The Amp4-Advanced can hold up to six different calibration setups which means it can be used.... -
Our Amp4 Classic is a very handy little battery powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. It supports two channels, which means it can be used with 2 different load cells. -
The USB Load Cell Module is a high performance digital signal conditioner. Both load cell and electronics are USB powered. The electronics are housed in a rugged enclosure. Comes with display and logging software. Two versions avaliable up to 500 or 4800 readings/second. -
Our Amp2 is a cased load cell amplifier which can be wall or surface mounted. Options include: Mains or DC power, Stainless Steel case, Remote programmer with display, Removable on-board Programmer with display, Relay Switching and Transparent lid. -
Our Amp2 is a cased load cell amplifier which can be wall or surface mounted. Options include: Mains or DC power, Stainless Steel case, Remote programmer with display, Removable on-board Programmer with display, Relay Switching and Transparent lid.
-
The PSD is a very handy little battery-powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. It supports two channels, which means it can be used with two different load cells.
-
The DSCUSB Load Cell Adapter is a high performance digital signal conditioner (Potentiometer Input version is also avalible). Both the load cell and electronics are USB powered. The electronics are housed in a rugged enclosure. Comes with display and logging software. Two versions avaliable up to 500 or 4800 readings/second.
-
The LCA20 is a cased load cell amplifier which can be wall or surface mounted. Options include: Mains or DC power, Stainless Steel case, Remote programmer with display, Removable on-board Programmer with display, Relay Switching and Transparent lid.
-
USB Programming Lead for our AMP2 load cell Amplifier. The lead allows for easy setup using a PC and the free software. The free software also enables data logging. Lead length 1.8m. -
The Universal Load Cell Amplifier is very versatile and will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The Amplifier also has multiple power options. -
This is Mantracourts Strain Gauge Signal Conditioning unit which is a very versatile load cell amplifier. The unit will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The amplifier also has multiple power options.
-
Out of stock
The ADW15 is Mantracourt's panel-mounted load cell amplifier and display (optional DIN rail mount). Options include: Mains or DC power, Relay switching, Analogue Outputs (dcV/mA), Panel or DIN rail mounting and RS232/485 Comms. -
An Active Junction Box for connecting up to 4 Load Cells together as part of one system. -
An Active Junction PCB ONLY for connecting up to 4 Load Cells together as part of one system - No CASE -
The Amp7-TxMidi is a wireless transmitter (up to 800m Range), which powers the load cell, and transmits the signal to a PC receiver; Hand Held Display; Relay switching unit; Wall Display; Printer; Analog signal converter; Serial data converter; etc...or all simultaneously! -
Large wall mounted display with extra large Digits for viewing from a distance etc. Visible up to 100m away (200mm digits). -
The 210 Series is a smaller version of the 200 Series with M6x1 threads each end. -
The 400 Series is a miniature button type Load Cell for compressive force measurement in confined space. Used across a wide range of industrial applications. -
The 200 Series is a range of miniature In-line mounting Load Cells for the measurement of tensile and compressive forces and used across a wide range of research and industrial applications. -
The 410 Series is a miniature button type Load Cell for compressive force measurement in confined space. Used across a wide range of industrial applications. -
The 520 Series is a range of high precision Stainless Steel Shear Beam Load Cells, suitable for a wide range of industrial weighing applications. Hermetically sealed to IP68 (ATEX Option available) and made from corrosion resistant stainless steel. -
The 600 Series is a range of high precision, robust folded shear beam type Load Cells that are manufactured in alloy and stainless steel, and are suitable for a wide range of industrial weighing applications. -
Load Link Load Cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V or Handheld Display. Comes with 10m cable. -
The 700 Series is a complete range of precision 'S' Beam Load Cells designed for Tension/Compression and Bi-Directional testing. Typical uses are in materials test machines, platform, hopper and tank weighing systems and overhead track scales. -
Load Link Load Cell with large LCD display and optional remote display. -
The 700 Series is a complete range of precision 'S' Beam Load Cells designed for Tension/Compression and Bi-Directional testing. Typical uses are in materials test machines, platform, hopper and tank weighing systems, conveyors and overhead track scales. -
Load Link Load Cell with 700m wireless link to hand held display. -
9 way D connector for connecting the load cell to the USB adapter. -
Wireless Dongle enables you to set up wireless telemetry modules and also run the free logging and display software. The range is up to 500 meters (line of sight) -
The 300 Series is a range of space efficient high capacity Load Cells, designed for compression only applications. These units are typically used in bearing supports, building monitoring and silo weighing. -
The 700 Series is a complete range of precision 'S' Beam Load Cells designed for Tension and Compression testing. -
The 100 Series is a range of Low Profile Load Cells (2.5kN, 5kN, 10kN, 25kN and 50kN), designed to suit a wide range of applications e.g. high accuracy load weighing, fatigue testing, component & structural test rigs and general purpose laboratory testing -
The 310 Series is a range of space efficient high capacity load cells, designed for compression only applications. This load cell is typically used in bearing supports, building monitoring and silo weighing. -
Load Link Load Cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V or Handheld Display. Comes with 10m cable. -
Load Link Load cell with large integral LCD display on the link and optional remote display. -
Load Link Load cell with 700m wireless link to hand held display. -
The 610 Series is a range of high precision, robust folded shear beam type Load Cells which are suitable for a wide range of industrial weighing applications. -
Range of bow shackles from Crosby. -
The 100 Series of Low Profile Load Cells has been designed to suit a wide range of applications including high accuracy load weighing, fatigue testing, component and structural test rigs and general purpose laboratory force measurement testing. -
The 600 Series is a range of high precision, robust folded shear beam type Load Cells that are manufactured in alloy and stainless steel, and are suitable for a wide range of industrial weighing applications. -
Low Profile Load Cell base for capacities up to 50kN. The base is Stainless Steel and provides the best possible mounting for our size 1 Low Profile Load Cells. The base has the same M20x2.5 central thread detail as the mating Load Cell. -
Mil connector with a pre-wired cable for easy connection between our low-profile load cell and our range of amplifiers. -
The 340 High Capacity Series is a range of space efficient high capacity Load Cells, designed for compression only applications. These units are typically used in bearing supports, building monitoring and silo weighing. -
360 High Capacity High Accuracy Series is a range of space efficient high capacity Load Cells, designed for compression only applications. These units are typically used in bearing supports, building monitoring and silo weighing. -
Load Link Load Cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V or Handheld Display. Comes with 10m cable. -
Load Link Load cell with large integral LCD display. This Link has the option of a remote Handheld Display (via 10m cable), so you can also view the load at a distance. -
Load Link Load Cell with 700m wireless link to hand held display. -
Group of Adapters for 900 Series. -
A wireless USB receiver module for the PC which will allow you to view and log data from many wireless load cells (using free software). The added advantage of this unit is that it will work in addition to the handheld displays and any other receivers -
Load Link Load Cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V or Handheld Display. Comes with 10m cable. -
Load Link Load Cell 25t with large integral LCD display. -
Load Link Load cell with 700m wireless link to hand held display. -
An inline cable adapter to allow you to connect a load cell with a Hand Held Display (Amp4 Classic) connector to our USB adapter (Amp5). Allowing you to use the load cell with both systems. -
Load Link Load Cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V or Handheld Display. Comes with 10m cable. -
USB cable for connecting the Amp4 Advanced to a PC. Once the display is connected to a PC you can use the free software to log data to a CSV file. -
Connector for connecting additional load cells to the Amp4 Advanced display or to replace a damaged connector. -
Connector for connecting the load cell to the Classic Amp4 display.
-
Connector for connecting to the RS232 port on the display. -
40 Tonne load cell for vehicle weighing. -
Calibration (5pts) traceable to National standards. Ranges up to 12 Tonne in Compression or Tension. For new load cell and instrument purchases only. -
Recalibration of your load cell. Ranges up to 12 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards -
Recalibration of your load cell. Ranges up to 30 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards. -
Load Link Load cell with 700m wireless link to hand held display.
-
Load Link Load Cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V or Handheld Display. Comes with 10m cable. -
A range of Wireless Handheld Displays (Amp7-Rx), which work with our range of wireless load cell transmitters. Range up to 800m. Multiple Displays can be connected to one load cell, so having extra Displays means the load can be monitored simultaneously in a number of locations or by several people. -
Load Link Load cell with large integral LCD display, with optional remote Handheld Display. -
Load Link 55 tonne Load cell with 700m wireless link to hand held display. -
Load Link 75 tonne Load cell with 700m wireless link to hand held display. -
UKAS Calibration. A range of Certified Calibrations Certificates for your load cell or load cell and indicator. We can arrange for your calibration to be carried out by a UKAS accredited lab. We can also arrange for ASTM E74 and ISO 376 Certification. -
An inline cable adapter to allow you to connect a load cell with a USB adapter (Amp5) connector to our Handheld Display (Amp4 Clasic). Allowing you to use the load cell with both systems.
