Low Profile Load Cell 100kN 200kN 300kN

Description

The 100 Series of Low Profile Load Cells has been designed to suit a wide range of applications including high accuracy load weighing, fatigue testing, component and structural test rigs and general purpose laboratory force measurement testing.

Now Available with In-line conditioning modules 0-5V, 0-10V, +/-10V, 4-20mA. PC-USB, Handheld Display (Amp4) and Wireless Transmitter (Amp7-TxMIDI) only available on cable version.

 

100 series low profile load cell data sheet.pdf

(opens in a new window)

Specification: (Standard Output)

Standard Ranges	0 to 100, 200, 300kN
Excitation Voltage	10V (normal), 15V (max) DC*
Sensitivity	2.0 mV/V (Nominal)*
Non-Linearity	0.05% of F.R.O or Better
Hysteresis	0.03% of F.R.O or Better
Zero Balance	0.5% of F.R.O or Better
Bridge Resistance	700 Ohm (8 Gauge Bridge)
Over Load Characteristics	150% Safe Overload 200% Ultimate Overload
Insulation Resistance	> 2000M Ohm
Storage Temp	-40 to +70 C
Operating Temp	-20 to +70 C
Compensated Temp	+20 to +70 C
Electrical Connections	Connector – Amphenol MIL Spec Or Integral Screened Cable
Thermal Sensitivity	0.005% of F.R.O/C or better

 

*Load Cells With USB or Amplified Modules click here for specifications

 

Data:

Capacity	A	B	C	D	E	F	Weight
0 to 100, 200, 300kN	155.0	60.0	48.0	3.5	M36x2.0	12 x 11.0 on 130.0 PCD	4.50 kg

 

Options:

Improved Performance
Improved Thermal Characteristics
UKAS Calibration (previously NAMAS)
Connector or Cable

Electrical Connections:

Connector Pin:

A – Excitation (+V)
B – Excitation (-V)
C – Output (+V)
D – Output (-V)

Cable:

Red – Excitation (+V)
Blue – Excitation (-V)
Green – Output (+V)
Yellow – Output (-V)

(Output In Compression)

Accessories:

Load Button
Base Plate
Location Ring