Low Profile Load Cell Ranges up to 50kN

Price (ex VAT): From: £299.95

Availability status


The 100 Series of Low Profile Load Cells have been designed to suit a wide range of applications including high accuracy load weighing, fatigue testing, component and structural test rigs and general purpose laboratory force measurement testing. (Product image is shown with optional base, load button and mating connector.)

Now Available with In-line conditioning modules 0-5V, 0-10V, +/-10V, 4-20mA. PC-USB, Handheld Display (Amp4) and Wireless Transmitter (Amp7-TxMIDI) only available on cable version.


alt 100 series low profile load cell data sheet.pdf

(opens in a new window)

Specification: (Standard Output)

Standard Ranges 0 to 2.5, 5, 10, 25, 50kN
Excitation Voltage 10V (normal), 15V (max) DC*
Sensitivity 2.0 mV/V (Nominal)*
Non-Linearity 0.05% of F.R.O or Better
Hysteresis 0.03% of F.R.O or Better
Zero Balance 0.5% of F.R.O or Better
Bridge Resistance 700 Ohm (8 Gauge Bridge)
Over Load Characteristics 150% Safe Overload
200% Ultimate Overload
Insulation Resistance > 2000M Ohm
Storage Temp -40 to +70 C
Operating Temp -20 to +70 C
Compensated Temp +20 to +70 C
Electrical Connections Connector – Amphenol MIL Spec
Or Integral Screened Cable
Thermal Sensitivity 0.005% of F.R.O/C or better


*Load Cells With USB or Amplified Modules click here for specifications

Load Cell 100


Capacity A B C D E F Weight
0 to 5, 10, 25, 50 kN 107.0 33.0 35.0 2.0 M20x2.5 8 x 8.5 on 90.0 PCD 1.45 kg


Electrical Connections:

Connector Pin:

A – Excitation (+V)
B – Excitation (-V)
C – Output (+V)
D – Output (-V)


Red – Excitation (+V)
Blue – Excitation (-V)
Green – Output (+V)
Yellow – Output (-V)

(Output In Compression)



UKAS Calibration (previously NAMAS)