In Line Type Load Cell

Description

The 200 Series is a range of miniature in-line mounting Load Cells for the measurement of tensile and compressive forces and used across a wide range of research and industrial applications. Typical applications include electro-mechanical test rigs and cable tension monitoring/testing.

Now Available with In-line conditioning modules. PC-USB, 0-5V, 0-10V, +/-10V, 4-20mA.

200 series In-line load cell data sheet4.pdf

(opens in new window)

Specification: (Standard Output)

Standard Ranges	0 to 100N, 250N, 500N, 1kN, 2kN, 5kN, 10kN, 20kN
Excitation Voltage	10V (normal), 15V (max) DC*
Sensitivity	2.0 mV/V (Nominal) – (100N 1.5mV/V nominal)*
Non-Linearity	0.29% of F.R.O or Better
Hysteresis	0.29% of F.R.O or Better
Zero Balance	0.5% of F.R.O or Better
Bridge Resistance	350 Ohm (4 Gauge Bridge)
Over Load Characteristics	125% Safe Overload 150% Ultimate Overload
Insulation Resistance	> 2000M Ohm
Storage Temp	-40 to +70 Degrees C
Operating Temp	-20 to +70 Degrees C
Compensated Temp	+20 to +70 Degrees C
Electrical Connections	Integral Screened Cable
Thermal Sensitivity	0.025% of F.R.O/Degrees C

 

*Load Cells With USB or Amplified Modules click here for specifications

 

 

Options:

Spherical End
UKAS Calibration (previously NAMAS)

Electrical Connections:

Red – Excitation +V
Blue – Excitation -V
Green – Output +V
Yellow – Output -V

(Output In Compression)

Accessories:

Load Button
In-Line Adaptors

Data:

Capacity	A	B	C	D	E (Thread)	Weight
0 to 0.10, 0.25, 0.50, 1.0, 2.0, 5.0kN	32.0	50.0	M12x1.75	15.0	12.0	150g
0 to 10, 20kN	32.0	50.0	M12x1.75	12.5	10.0	150g

.