Miniature In Line Load Cell

Description

The 210 Series is a smaller version of the 200 Series with M6x1 threads each end. The 210 Series is a range of miniature In-line mounting Load Cells which can be used to measure tensile or compressive forces and are used across a wide range of research and industrial applications. Typical applications include electro-mechanical test rigs and cable tension monitoring/testing.

Now Available with In-line conditioning modules. PC-USB, 0-5V, 0-10V, +/-10V, 4-20mA.

 

Specification: (Standard Output)

Standard Ranges	0 to 100N, 200N, 500N, 1kN
Excitation Voltage	10V (normal), 15V (max) DC*
Sensitivity	1.5 mV/V (Nominal) – (100N 1.3mV/V nominal)*
Non-Linearity	0.29% of F.R.O or Better
Hysteresis	0.29% of F.R.O or Better
Zero Balance	0.5% of F.R.O or Better
Bridge Resistance	350 Ohm (4 Gauge Bridge)
Over Load Characteristics	125% Safe Overload 150% Ultimate Overload
Insulation Resistance	> 2000M Ohm
Storage Temp	-40 to +70 Degrees C
Operating Temp	-20 to +70 Degrees C
Compensated Temp	+20 to +70 Degrees C
Electrical Connections	Integral Screened Cable
Thermal Sensitivity	0.025% of F.R.O/Degrees C

 

*Load Cells With USB or Amplified Modules click here for specifications

 

Options:

Spherical End
UKAS Calibration (previously NAMAS)

Electrical Connections:

Red – Excitation +V
Blue – Excitation -V
Green – Output +V
Yellow – Output -V

(Output In Compression)