All Products from Richmond Industries
In this section we have listed all our load cell products. Yes, absolutely everything, including load cells, load links, load cell amplifiers, load cell junction boxes, connecting cables, fixing accessories, the lot. There is no filtering so just scroll through and see if there’s something you like.
STILL not found what you’re looking for?
Call us on +44 (0)1189 310 396. We are happy to undertake bespoke customer projects on request, and would be happy to discuss your specific requirements. We look forward to hearing from you!
-
The 200 Series is a range of miniature In-line mounting Load Cells for the measurement of tensile and compressive forces and used across a wide range of research and industrial applications. -
The 700 Series is a complete range of precision 'S' Beam Load Cells designed for Tension/Compression and Bi-Directional testing. Typical uses are in materials test machines, platform, hopper and tank weighing systems and overhead track scales. -
The 410 Series is a miniature button type Load Cell for compressive force measurement in confined space. Used across a wide range of industrial applications. -
The 210 Series is a smaller version of the 200 Series with M6x1 threads each end. -
The 900 Series is a range of low capacity high precision 'S' Beam Load Cells. These load cells have built in overload protection and are designed for Tension/Compression and Bi-Directional testing. -
The 100 Series is a range of Low Profile Load Cells (2.5kN, 5kN, 10kN, 25kN and 50kN), designed to suit a wide range of applications e.g. high accuracy load weighing, fatigue testing, component & structural test rigs and general purpose laboratory testing -
The 700 Series is a complete range of precision 'S' Beam Load Cells designed for Tension/Compression and Bi-Directional testing. Typical uses are in materials test machines, platform, hopper and tank weighing systems, conveyors and overhead track scales. -
The 700 Series is a complete range of precision 'S' Beam Load Cells designed for Tension and Compression testing. -
The Universal Load Cell Amplifier is very versatile and will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The Amplifier also has multiple power options. -
Calibration (5pts) traceable to National standards. Ranges up to 12 Tonne in Compression or Tension. For new load cell and instrument purchases only. -
This is Mantracourts Strain Gauge Signal Conditioning unit which is a very versatile load cell amplifier. The unit will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The amplifier also has multiple power options.
-
Our Amp4 Advanced is another handy little battery-powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. The USB port provides configuration, calibration, and live logging functionality. The Amp4-Advanced can hold up to six different calibration setups which means it can be used.... -
The 300 Series is a range of space efficient high capacity Load Cells, designed for compression only applications. These units are typically used in bearing supports, building monitoring and silo weighing. -
The 100 Series of Low Profile Load Cells has been designed to suit a wide range of applications including high accuracy load weighing, fatigue testing, component and structural test rigs and general purpose laboratory force measurement testing. -
Our Amp9 Instrument is an "All-in-One" Display Controller, a 6 digit load cell Panel Meter with options for Switching and Analogue output. -
The 400 Series is a miniature button type Load Cell for compressive force measurement in confined space. Used across a wide range of industrial applications. -
Connector for connecting additional load cells to the Amp4 Advanced display or to replace a damaged connector. -
The 830 Series Low Cost Cantilever Beam. Their primary use is in low cost bench scales and to a lesser degree in money counting machines, part counting scales and in process weighing applications. -
Mil connector with a pre-wired cable for easy connection between our low-profile load cell and our range of amplifiers. -
The 520 Series is a range of high precision Stainless Steel Shear Beam Load Cells, suitable for a wide range of industrial weighing applications. Hermetically sealed to IP68 (ATEX Option available) and made from corrosion resistant stainless steel. -
Eye Bolt M24x2 Male and Lock Nut. -
Stainless Steel Load Button to reduce errors from side loads or misalignment. M12 thread. -
Recalibration of your load cell. Ranges up to 12 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards -
The 710 is a multi-purpose stainless steel S-type load cell which can be used in tension or compression. This product is suitable for a wide range of hybrid scales, overhead track scales, belt scales and process weighing applications. -
Rod End Bearing M12x1.75 Female -
The USB Load Cell Module is a high performance digital signal conditioner. Both load cell and electronics are USB powered. The electronics are housed in a rugged enclosure. Comes with display and logging software. Two versions avaliable up to 500 or 4800 readings/second. -
The 310 Series is a range of space efficient high capacity load cells, designed for compression only applications. This load cell is typically used in bearing supports, building monitoring and silo weighing. -
Eye Bolt M20 Male. -
Rod End Bearing M6x1 Female -
9 way D connector for connecting the load cell to the USB adapter. -
UKAS Calibration. A range of Certified Calibrations Certificates for your load cell or load cell and indicator. We can arrange for your calibration to be carried out by a UKAS accredited lab. We can also arrange for ASTM E74 and ISO 376 Certification. -
Lemo Plug Connector. -
Eye Bolt M12 Male. -
Stainless Steel Load Button to reduce errors from side loads or misalignment. M36x2 thread. -
The 820 Series are a higher capacity version of the 810 Series Cantilever Beam. Their primary use is in low cost bench scales and to a lesser degree in money counting machines, part counting scales and in process weighing applications. -
Recalibration of your load cell. Ranges up to 30 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards. -
Connector for connecting the load cell to the Classic Amp4 display.
-
The 810 Series load cells are a range of low capacity Cantilever Beams. Their primary use is under low cost bench scales and to a lesser degree in money counting machines, part counting scales and in process weighing applications. -
Stainless Steel Load Button to reduce errors from side loads or misalignment. M20x2.5 thread. -
Our Amp4 Classic is a very handy little battery powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. It supports two channels, which means it can be used with 2 different load cells. -
Rod End Bearing M20x2.5 Male -
Our Amp2 is a cased load cell amplifier which can be wall or surface mounted. Options include: Mains or DC power, Stainless Steel case, Remote programmer with display, Removable on-board Programmer with display, Relay Switching and Transparent lid. -
Miniature OEM wireless transmitters for use with Mantracourts T24 range. Module with internal antenna transmits up to 500m but the version that uses an external Antenna can transmit up to 800m (1/2 mile). Standard versions can stream at up to 200 readings per second (Fast version up to 2,000 readings per second). -
The 510 Series is a range of high precision and robust shear beam Load Cells suitable for a wide range of industrial weighing applications. -
Load Link Load Cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V or Handheld Display. Comes with 10m cable. -
Low Profile Load Cell base for capacities over 50kN and up to 300kN. Base is Stainless Steel and provides the best possible mounting for our Size 2 Low Profile Load Cells. The base has the same M36x2 central thread detail as the mating Load Cell.
