Low Capacity Load Cell

Description

The 900 Series is a range of low capacity high precision ‘S’ Beam Load Cells designed for Tension/Compression and Bi-Directional testing across a wide range of research and industrial applications. Typical uses are in materials test machines, component test rigs and general in-line load measurement applications. The 900 Series also have built in overload protection.

Now Available with In-line conditioning modules. PC-USB, 0-5V, 0-10V, +/-10V, 4-20mA.

 

Specification: (Standard Output)

Standard Ranges	0 to 5, 10, 20, 50, 100, 250, 500N
Excitation Voltage	10V (normal), 15V (max) DC*
Sensitivity	2.0 mV/V (nominal)*
Non-Linearity	0.03% of F.R.O or Better
Hysteresis	0.03% of F.R.O or Better
Zero Balance	0.50% of F.R.O
Bridge Resistance	350 Ohm
Over Load Characteristics	500% with no loss in Calibration (300% > 250N) 500% with no Structural failure (300% > 250N)
Insulation Resistance	> 1000M Ohm
Storage Temp	-40 to +70 Degrees C
Operating Temp	-20 to +70 Degrees C
Compensated Temp	+20 to +70 Degrees C (Standard)
Electrical Connections	Integral Screened Cable
Thermal Sensitivity	0.005% of F.R.O/Degrees C

 

*Load Cells With USB or Amplified Modules click here for specifications

 

 

 

Options:

Improved Performance
Improved Thermal Characteristics
Increased Cable Length
UKAS Calibration (previously NAMAS)

Electrical Connections:

Pin:

Red – Excitation +Ve
Blue – Excitation -Ve
Green – Output +Ve
Yellow – Output -Ve
Under Compression

Accessories:

Load Button
Rod ends
Eye Rings

Capacity	A	B	C	D	Weight
0 to 5, 10, 20, 50, 100, 250, 500N	50.0	12.5	48.0	M6x1	150g