All Products from Richmond Industries
In this section we have listed all our load cell products. Yes, absolutely everything, including load cells, load links, load cell amplifiers, load cell junction boxes, connecting cables, fixing accessories, the lot. There is no filtering so just scroll through and see if there’s something you like.
STILL not found what you’re looking for?
Call us on +44 (0)1189 310 396. We are happy to undertake bespoke customer projects on request, and would be happy to discuss your specific requirements. We look forward to hearing from you!
-
Mantracourts T24 Wireless Relay Module which works with our wireless load cell transmitters. The module has 2 relays which can be set to function at set points. The module can listen to up to 8 transmitters, sum the values, and switch on the results.... -
A handy Wireless Relay Module which works with our wireless load cell transmitters. The module has 2 relays which can be set to function at set points. The module can listen to up to 8 transmitters, sum the values, and switch on the results....
-
Our Amp9 Instrument is an "All-in-One" Display Controller, a 6 digit load cell Panel Meter with options for Switching and Analogue output. -
Our Amp4 Classic is a very handy little battery powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. It supports two channels, which means it can be used with 2 different load cells. -
The PSD is a very handy little battery-powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. It supports two channels, which means it can be used with two different load cells.
-
The Amp7-TxMidi is a wireless transmitter (up to 800m Range), which powers the load cell, and transmits the signal to a PC receiver; Hand Held Display; Relay switching unit; Wall Display; Printer; Analog signal converter; Serial data converter; etc...or all simultaneously! -
The LCA20 is a cased load cell amplifier which can be wall or surface mounted. Options include: Mains or DC power, Stainless Steel case, Remote programmer with display, Removable on-board Programmer with display, Relay Switching and Transparent lid. -
The USB Load Cell Module is a high performance digital signal conditioner. Both load cell and electronics are USB powered. The electronics are housed in a rugged enclosure. Comes with display and logging software. Two versions avaliable up to 500 or 4800 readings/second. -
A range of wireless receiver modules for the PC (USB, RS232 & RS485) which allow you to view and log data from many wireless load cells (using free software). The added advantage of these units is that they will work in addition to the hand held wireless displays. -
Out of stock
No longer manufactured - for info only. Superseded by the Amp9 Instrument . The Amp1 Instrument 'All in One' load cell amplifier and display. Options include: Mains or DC power, Relay Switching, Analogue Outputs (dcV/mA), Panel or Din rail mounting and RS232/485 Comms. -
The DSCUSB Load Cell Adapter is a high performance digital signal conditioner (Potentiometer Input version is also avalible). Both the load cell and electronics are USB powered. The electronics are housed in a rugged enclosure. Comes with display and logging software. Two versions avaliable up to 500 or 4800 readings/second.
-
Out of stock
The ADW15 is Mantracourt's panel-mounted load cell amplifier and display (optional DIN rail mount). Options include: Mains or DC power, Relay switching, Analogue Outputs (dcV/mA), Panel or DIN rail mounting and RS232/485 Comms.
-
This is Mantracourts Strain Gauge Signal Conditioning unit which is a very versatile load cell amplifier. The unit will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The amplifier also has multiple power options. -
Recalibration of your load cell. Ranges up to 100 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards -
The 610 Series is a range of high precision, robust folded shear beam type Load Cells which are suitable for a wide range of industrial weighing applications. -
Our Amp4 Advanced is another handy little battery-powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. The USB port provides configuration, calibration, and live logging functionality. The Amp4-Advanced can hold up to six different calibration setups which means it can be used.... -
A wireless USB receiver module for the PC which will allow you to view and log data from many wireless load cells (using free software). The added advantage of this unit is that it will work in addition to the hand held wireless display supplied with... -
Recalibration of your load cell. Ranges up to 30 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards. -
A wireless USB receiver module for the PC which will allow you to view and log data from many wireless load cells (using free software). The added advantage of this unit is that it will work in addition to the handheld displays and any other receivers
-
An Active Junction Box for connecting up to 4 Load Cells together as part of one system. -
Recalibration of your load cell. Ranges up to 12 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards -
Wireless Dongle enables you to set up wireless telemetry modules and also run the free logging and display software. The range is up to 500 meters (line of sight) -
The Universal Load Cell Amplifier is very versatile and will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The Amplifier also has multiple power options.
-
The 520 Series is a range of high precision Stainless Steel Shear Beam Load Cells, suitable for a wide range of industrial weighing applications. Hermetically sealed to IP68 (ATEX Option available) and made from corrosion resistant stainless steel. -
The 600 Series is a range of high precision, robust folded shear beam type Load Cells that are manufactured in alloy and stainless steel, and are suitable for a wide range of industrial weighing applications. -
The 720 is a multi-purpose stainless steel S-type load cell which can be used in tension or compression. This product is suitable for a wide range of hybrid scales, overhead track scales, belt scales and process weighing applications. -
An Active Junction PCB ONLY for connecting up to 4 Load Cells together as part of one system - No CASE -
Hand Held Programmer and display for load cell amplifier AMP2. Used to programme the amplifier or display the output while connected, with the advantage that the amplifier can be programmed and the hand set removed so that no one else can alter the set up -
The 710 is a multi-purpose stainless steel S-type load cell which can be used in tension or compression. This product is suitable for a wide range of hybrid scales, overhead track scales, belt scales and process weighing applications. -
Recalibration of your load link. Ranges up to 30 Tonne (tension only). -
The 510 Series is a range of high precision and robust shear beam Load Cells suitable for a wide range of industrial weighing applications. -
The 500 Series is a range of high precision and robust shear beam Load Cells that are suitable for a wide range of industrial weighing applications. -
Low Profile Load Cell base for capacities over 50kN and up to 300kN. Base is Stainless Steel and provides the best possible mounting for our Size 2 Low Profile Load Cells. The base has the same M36x2 central thread detail as the mating Load Cell. -
A spherical loading plate for use with 100 Series load cell fitted with a load button (300kN). -
Calibration (5pts) traceable to National standards. Ranges up to 12 Tonne in Compression or Tension. For new load cell and instrument purchases only. -
Low Profile Load Cell base for capacities up to 50kN. The base is Stainless Steel and provides the best possible mounting for our size 1 Low Profile Load Cells. The base has the same M20x2.5 central thread detail as the mating Load Cell. -
Stainless Steel Load Button to reduce errors from side loads or misalignment. M36x2 thread. -
Mil connector with a pre-wired cable for easy connection between our low-profile load cell and our range of amplifiers. -
Group of Adapters for 900 Series. -
Proof Testing to twice the S.W.L - NOTE: only available when booked with calibration CAL-030T. -
Stainless Steel Load Button to reduce errors from side loads or misalignment. M20x2.5 thread. -
USB Programming Lead for our AMP2 load cell Amplifier. The lead allows for easy setup using a PC and the free software. The free software also enables data logging. Lead length 1.8m. -
Rod End Bearing M24x2 Male -
Lemo Plug Connector. -
Stainless Steel Load Button to reduce errors from side loads or misalignment. M12 thread. -
On Board Programmer and display. -
Eye Bolt M24x2 Male and Lock Nut. -
An inline cable adapter to allow you to connect a load cell with a USB adapter (Amp5) connector to our Handheld Display (Amp4 Clasic). Allowing you to use the load cell with both systems.
