The 100 Series of Low Profile Load Cells have been designed to suit a wide range of applications including high accuracy load weighing, fatigue testing, component and structural test rigs and general purpose laboratory force measurement testing. (Product image is shown with optional base, load button and mating connector.)
Now Available with In-line conditioning modules 0-5V, 0-10V, +/-10V, 4-20mA. PC-USB, Handheld Display (Amp4) and Wireless Transmitter (Amp7-TxMIDI) only available on cable version.
100 series low profile load cell data sheet.pdf
(opens in a new window)
Standard Ranges | 0 to 2.5, 5, 10, 25, 50kN |
Excitation Voltage | 10V (normal), 15V (max) DC* |
Sensitivity | 2.0 mV/V (Nominal)* |
Non-Linearity | 0.05% of F.R.O or Better |
Hysteresis | 0.03% of F.R.O or Better |
Zero Balance | 0.5% of F.R.O or Better |
Bridge Resistance | 350 Ohm (8 Gauge Bridge) |
Over Load Characteristics | 150% Safe Overload 200% Ultimate Overload |
Insulation Resistance | > 2000M Ohm |
Storage Temp | -40 to +70 C |
Operating Temp | -20 to +70 C |
Compensated Temp | +20 to +70 C |
Electrical Connections | Connector - Amphenol MIL Spec Or Integral Screened Cable |
Thermal Sensitivity | 0.005% of F.R.O/C or better |
*Load Cells With USB or Amplified Modules click here for specifications
Capacity | A | B | C | D | E | F | Weight |
0 to 5, 10, 25, 50 kN | 107.0 | 33.0 | 35.0 | 2.0 | M20x2.5 | 8 x 8.5 on 90.0 PCD | 1.45 kg |
Connector Pin:
A - Excitation (+V)
B - Excitation (-V)
C - Output (+V)
D - Output (-V)
Cable:
Red - Excitation (+V)
Blue - Excitation (-V)
Green - Output (+V)
Yellow - Output (-V)
(Output In Compression)
UKAS Calibration (previously NAMAS)