Low Capacity Load CellLow Capacity Load Cell
Move your mouse over image or click to enlarge
Low Capacity Load Cell up to 500N (50kg)

Low Capacity Load Cell

Price (ex VAT): 
Price / kg:
Capacity...(Please select)
Output set up...
Ask a question about this product

Product Description

The 900 Series is a range of low capacity high precision 'S' Beam Load Cells designed for Tension/Compression and Bi-Directional testing across a wide range of research and industrial applications. Typical uses are in materials test machines, component test rigs and general in-line load measurement applications. The 900 Series also have built in overload protection.

Now Available with In-line conditioning modules. PC-USB, 0-5V, 0-10V, +/-10V, 4-20mA.


Specification: (Standard Output)

Standard Ranges 0 to 5, 10, 20, 50, 100, 250, 500N
Excitation Voltage 10V (normal), 15V (max) DC*
Sensitivity 2.0 mV/V (nominal)*
Non-Linearity 0.03% of F.R.O or Better
Hysteresis 0.03% of F.R.O or Better
Zero Balance 0.50% of F.R.O
Bridge Resistance 350 Ohm
Over Load Characteristics 500% with no loss in Calibration (300% > 250N)
500% with no Structural failure (300% > 250N)
Insulation Resistance > 1000M Ohm
Storage Temp -40 to +70 Degrees C
Operating Temp -20 to +70 Degrees C
Compensated Temp +20 to +70 Degrees C (Standard)
Electrical Connections Integral Screened Cable
Thermal Sensitivity 0.005% of F.R.O/Degrees C


*Load Cells With USB or Amplified Modules click here for specifications


Low Capacity Load Cell




Improved Performance
Improved Thermal Characteristics
Increased Cable Length
UKAS Calibration (previously NAMAS)

Electrical Connections:


Red - Excitation +Ve
Blue - Excitation -Ve
Green - Output +Ve
Yellow - Output -Ve
Under Compression


Load Button
Rod ends
Eye Rings

Capacity A B C D Weight
0 to 5, 10, 20, 50, 100, 250, 500N 50.0 12.5 48.0 M6x1 150g