Load Cell Displays Amplifiers

The Amp7-TxMidi is a wireless transmitter (up to 800m Range), which powers the load cell, and transmits the signal to a PC receiver; Hand Held Display; Relay switching unit; Wall Display; Printer; Analog signal converter; Serial data converter; etc...or all simultaneously!

Our Amp4 is a very handy little battery powered display. The unit provides power to the load cell and displays the resulting signal in whatever units it’s been set up in. It supports two channels, which means it can be used with 2 different load cells.

The USB Load Cell Module is a high performance digital signal conditioner. Both load cell and electronics are USB powered. The electronics are housed in a rugged enclosure. Comes with display and logging software. Two versions avaliable up to 500 or 4800 readings/second.

The Amp1 Instrument 'All in One' load cell amplifier and display. Options include: Mains or DC power, Relay Switching, Analogue Outputs (dcV/mA), Panel or Din rail mounting and RS232/485 Comms.

If you have an existing AMP1 'All-in-One' Instrument we can upgrade it for you so you don't have to buy a new unit. Add control relays, RS232/485 Comms or Analogue outputs such as 0-10V, +-10V, 0-1mA, 0-20mA, 4-20mA.

Our Amp2 is a cased load cell amplifier which can be wall or surface mounted. Options include: Mains or DC power, Stainless Steel case, Remote programmer with display, Removable on-board Programmer with display, Relay Switching and Transparent lid.

The Universal Load Cell Amplifier is very versatile and will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The Amplifier also has multiple power options.

An Active Junction Box for connecting up to 4 Load Cells together as part of one system.

An Active Junction PCB ONLY for connecting up to 4 Load Cells together as part of one system - No CASE

Large wall mounted display with extra large Digits for viewing from a distance etc. Visible up to 100m away (200mm digits).

An inline cable adapter to allow you to connect a load cell with a Hand Held Display (Amp4) connector to our USB adapter (Amp5). Allowing you to use the load cell with both systems.

Connector for connecting the load cell to the display.

Connector for connecting to the RS232 port on the display.

An inline cable adapter to allow you to connect a load cell with a USB adapter (Amp5) connector to our Hand Held Display (Amp4). Allowing you to use the load cell with both systems.

A range of Wireless Handheld Displays (Amp7-Rx), which work with our range of wireless load cell transmitters. Range up to 800m.

Large Wireless Display with Large LED Digits for wall mounting etc. Visible up to 60m away.

Active USB 2.0 repeater cable which overcomes the maximum 5m length of a standard USB cable. Connect up to 5 cables in series (site/use dependant). No external power required. Length of 5m. No software required. Backwards compatible with USB1.1

UKAS Calibration. A range of Certified Calibrations Certificates for your load cell or load cell and indicator. We can arrange for your calibration to be carried out by a UKAS accredited lab. We can also arrange for ASTM E74 and ISO 376 Certification.

9 way D connector for connecting the load cell to the USB adapter.