Print
Low Capacity Load CellLow Capacity Load Cell
Move your mouse over image or click to enlarge

Low Capacity Load Cell


Price (ex VAT): 
£159.95
Price / kg:
newinstock.gif
Capacity...
Termination...
Output...
Output set up...
Ask a question about this product

Product Description

The 900 Series is a range of low capacity high precision 'S' Beam Load Cells designed for Tension/Compression and Bi-Directional testing across a wide range of research and industrial applications. Typical uses are in materials test machines, component test rigs and general in-line load measurement applications. The 900 Series also have built in overload protection.

Now Available with In-line conditioning modules. PC-USB, 0-5V, 0-10V, +/-10V, 4-20mA.

 

Specification: (Standard Output)

Standard Ranges 0 to 5, 10, 20, 50, 100, 250, 500N
Excitation Voltage 10V (normal), 15V (max) DC*
Sensitivity 2.0 mV/V (nominal)*
Non-Linearity 0.03% of F.R.O or Better
Hysteresis 0.03% of F.R.O or Better
Zero Balance 0.50% of F.R.O
Bridge Resistance 350 Ohm
Over Load Characteristics 500% with no loss in Calibration (300% > 250N)
500% with no Structural failure (300% > 250N)
Insulation Resistance > 1000M Ohm
Storage Temp -40 to +70 Degrees C
Operating Temp -20 to +70 Degrees C
Compensated Temp +20 to +70 Degrees C (Standard)
Electrical Connections Integral Screened Cable
Thermal Sensitivity 0.005% of F.R.O/Degrees C

 

*Load Cells With USB or Amplified Modules click here for specifications

 

Low Capacity Load Cell

 

 

Options:

Improved Performance
Improved Thermal Characteristics
Increased Cable Length
UKAS Calibration (previously NAMAS)

Electrical Connections:

Pin:

Red - Excitation +Ve
Blue - Excitation -Ve
Green - Output +Ve
Yellow - Output -Ve
Under Compression

Accessories:

Load Button
Rod ends
Eye Rings

Capacity A B C D Weight
0 to 5, 10, 20, 50, 100, 250, 500N 50.0 12.5 48.0 M6x1 150g