Product Details:
The 210 Series is a smaller version of the 200 Series with M6 threads each end. The 210 Series is a range of miniature in-line mounting Load Cells which can be used to measure tensile or compressive forces and are used across a wide range of research and industrial applications. Typical applications include electro-mechanical test rigs and cable tension monitoring/testing.
Now Available with In-line conditioning modules. PC-USB, 0-5V, 0-10V, +/-10V, 4-20mA.
Specification: (Standard Output)
| Standard Ranges | 0 to 100N, 250N, 500N, 1kN |
| Excitation Voltage | 10V (normal), 15V (max) DC* |
| Sensitivity | 1.5 mV/V (Nominal) - (100N 1.3mV/V nominal)* |
| Non-Linearity | 0.29% of F.R.O or Better |
| Hysteresis | 0.29% of F.R.O or Better |
| Zero Balance | 0.5% of F.R.O or Better |
| Bridge Resistance | 350 Ohm (4 Gauge Bridge) |
| Over Load Characteristics | 125% Safe Overload 150% Ultimate Overload |
| Insulation Resistance | > 2000M Ohm |
| Storage Temp | -40 to +70 Degrees C |
| Operating Temp | -20 to +70 Degrees C |
| Compensated Temp | +20 to +70 Degrees C |
| Electrical Connections | Integral Screened Cable |
| Thermal Sensitivity | 0.025% of F.R.O/Degrees C |
*Load Cells With USB or Amplified Modules click here for specifications
Options:
Spherical End
UKAS Calibration (previously NAMAS)
Electrical Connections:
Red - Excitation +V
Blue - Excitation -V
Green - Output +V
Yellow - Output -V
(Output In Compression)
You may also be interested in this/these product(s)
£249.95
|
£19.95
|
Recently Viewed Products
- Load Link With Display 5T (Category: Up to 10kN - 1,000kg 2,000lbs)
- Miniature Button Load Cell up to 2kN (Category: Miniature Button Load Cells)
- Load Link With Display 250kg 500kg 1T 2.5T (Category: Up to 100kN - 10,000kg 20,000lb)
- Shear Beam Load Cell 5kN 10kN (Category: Shear Beam Load Cells)
- S Beam Load Cell 50kg,100kg (Category: S Beam Load Cells)
