Product Details:
The 900 Series is a range of low capacity high precision 'S' Beam Load Cells designed for Tension/Compression and Bi-Directional testing across a wide range of research and industrial applications. Typical uses are in materials test machines, component test rigs and general in-line load measurement applications. The 900 Series also have built in overload protection.
Now Available with In-line conditioning modules. PC-USB, 0-5V, 0-10V, +/-10V, 4-20mA.
Specification: (Standard Output)
| Standard Ranges | 0 to 5, 10, 20, 50, 100, 250, 500N |
| Excitation Voltage | 10V (normal), 15V (max) DC* |
| Sensitivity | 2.0 mV/V (nominal)* |
| Non-Linearity | 0.03% of F.R.O or Better |
| Hysteresis | 0.03% of F.R.O or Better |
| Zero Balance | 0.50% of F.R.O |
| Bridge Resistance | 350 Ohm |
| Over Load Characteristics | 150% with no loss in Calibration 200% with no Structural failure |
| Insulation Resistance | > 1000M Ohm |
| Storage Temp | -40 to +70 Degrees C |
| Operating Temp | -20 to +70 Degrees C |
| Compensated Temp | +20 to +70 Degrees C (Standard) |
| Electrical Connections | Integral Screened Cable |
| Thermal Sensitivity | 0.005% of F.R.O/Degrees C |
*Load Cells With USB or Amplified Modules click here for specifications
Options:
Improved Performance
Improved Thermal Characteristics
Increased Cable Length
UKAS Calibration (previously NAMAS)
Electrical Connections:
Pin:
Red - Excitation +Ve
Blue - Excitation -Ve
Green - Output +Ve
Yellow - Output -Ve
Under Compression
Accessories:
Load Button
Rod ends
Eye Rings
| Capacity | A | B | C | D | Weight |
| 0 to 5, 10, 20, 50, 100, 250, 500N | 50.0 | 12.5 | 48.0 | M6 | 150g |
Recently Viewed Products
- Very Low Capacity Load Cell (Category: Very Low Capacity)
- Load Link Wireless Display 5T (Category: Wireless Load Link)
