Product Details:
This is a high precision, robust folded shear beam type Load Cell that is manufactured in stainless steel, suitable for a wide range of industrial weighing applications. (Load Cell has no cosmetic finish - left as heat treated stainless: see photo.)
Specification:
| Standard Ranges | 0 to 75kN |
| Excitation Voltage | 10V (normal), 15V (max) DC |
| Sensitivity | 2.0 mV/V (nominal) |
| Non-Linearity | 0.05% of F.R.O or Better |
| Hysteresis | 0.05% of F.R.O or Better |
| Zero Balance | 0.50% of F.R.O |
| Bridge Resistance | 350 Ohm |
| Over Load Characteristics | 150% with no loss in Calibration 200% with no Structural failure |
| Insulation Resistance | > 1000M Ohm |
| Storage Temp | -40 to +70 Degrees C |
| Operating Temp | -20 to +70 Degrees C |
| Compensated Temp | +20 to +70 Degrees C (Standard) |
| Electrical Connections | Integral Screened Cable |
| Thermal Sensitivity | 0.005% of F.R.O/Degrees C |
Options:
UKAS Calibration (previously NAMAS)
Longer Cable
Electrical Connections:
Red - Excitation +Ve
Blue - Excitation -Ve
Green - Output +Ve
Yellow - Output -Ve
Under Compression
Data:
| Capacity | A | B | C | D | Weight |
| 0 to 75kN | 175.0 | 54.0 | 160.0 | M24x2x 24 Deep |
7.5kg |
Recently Viewed Products
- Load Cell Amplifier Transparent Lid (Category: Load Cell Amp Accessories)
- Load Cell Amplifier - Hand Held Programmer (Category: Load Cell Amp Accessories)
- Load Cell Amplifier - On Board Programmer (Category: Load Cell Amp Accessories)
- Rod End Bearing M12 Female (Category: In Line Load Cells)
- In Line Type Load Cell (Category: In Line Load Cells)
