Product Details:
The 810 Series load cells are a range of low capacity Cantilever Beams. Their primary use is under low cost bench scales and to a lesser degree in money counting machines, part counting scales and in process weighing applications. These single point cells are designed for High Accuracy Low Cost Applications. (* Refers to preferred sizes 5,10,20,50,100kg. Non-preferred sizes 15,30,75kg delivery 2wks).
Specification:
| Standard Ranges | 0 to 5, 10, 15, 20, 30, 50, 75, 100kg |
| Excitation Voltage | 10V (normal), 15V (max) DC |
| Sensitivity | 2.0 mV/V (+/- 10%) |
| Non-Linearity | 0.025% of F.R.O or Better |
| Hysteresis | 0.005% of F.R.O or Better |
| Zero Balance | 2% |
| Bridge Resistance | 350 Ohm |
| Over Load Characteristics | 150% with no loss in Calibration 200% with no Structural failure |
| Insulation Resistance | > 1000M Ohm |
| Storage Temp | -30 to +70 Degrees C |
| Operating Temp | -20 to +70 Degrees C |
| Compensated Temp | -10 to +40 Degrees C (Standard) |
| Electrical Connections | 3m Integral Screened Cable (standard) |
| Thermal Sensitivity | 0.005% of F.R.O/Degrees C |
Options:
UKAS Calibration (previously NAMAS)
Electrical Connections:
Red - Excitation +Ve
Black - Excitation -Ve
Green - Output +Ve
White - Output -Ve
Blue - Sense +V
Brown - Sense -V
Under Compression
Data:
| Capacity | A | B | C | D | E | F | G | H | I | J | Weight |
| All Capacities | 150.0 | 40.0 | 25.4 | N/A | 34.0 | 100.0 | 25.0 | 19.0 | 10.0 | 39.0 | 0.4kg |
Recently Viewed Products
- Low Capacity Load Cell (Category: Low Capacity Load Cells)
- Very Low Capacity Load Cell (Category: Very Low Capacity)
- Load Link Wireless Display 5T (Category: Wireless Load Link)
