All Products By Photo
Price From:
£795.00
Load Link Load cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V. Comes with 10m cable. Requires separate instrumentation.
Price From:
£8 195.00
Load Link Load cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V. Comes with 10m cable. Requires separate instrumentation.
Price From:
£919.00
Load Link Load cell with analogue output. Options include 4-20mA, 0-10V, +-10V, 0-5V. Comes with 10m cable. Requires separate instrumentation.
Price From:
£269.95
The Amp1 Instrument 'All in One' load cell amplifier and display. Options include: Mains or DC power, Relay Switching, Analogue Outputs (dcV/mA), Panel or Din rail mounting and RS232/485 Comms.
Price From:
£69.95
If you have an existing AMP1 'All-in-One' Instrument we can upgrade it for you so you don't have to buy a new unit. Add control relays, RS232/485 Comms or Analogue outputs such as 0-10V, +-10V, 0-1mA, 0-20mA, 4-20mA.
Price From:
£239.95
Our Amp2 is a cased load cell amplifier which can be wall or surface mounted. Options include: Mains or DC power, Stainless Steel case, Remote programmer with display, Removable on-board Programmer with display, Relay Switching and Transparent lid.
Price From:
£139.95
The Universal Load Cell Amplifier is very versatile and will power the load cell and amplify the signal to any of the following user-selectable analogue outputs ±10V, ±5V, 0-10V, 0-5V, 0-20mA, 4-20mA. The Amplifier also has multiple power options.
Price From:
£89.95
Low Profile Load Cell base for capacities up to 50kN. The base is Stainless Steel and provides the best possible mounting for our size 1 Low Profile Load Cells. The base has the same M20x2.5 central thread detail as the mating Load Cell.
Price From:
£129.95
Low Profile Load Cell base for capacities over 50kN and up to 300kN. Base is Stainless Steel and provides the best possible mounting for our Size 2 Low Profile Load Cells. The base has the same M36x2 central thread detail as the mating Load Cell.
Price From:
£19.95
Low Profile Load Cell Connector.
Price From:
£25.95
Mil Connector with pre wired cable for easy direct connection to our Low Profile Load Cell.
Price From:
£79.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M36x2 thread.
Price From:
£59.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M20x2.5 thread.
Price From:
£29.95
Rod End Bearing M12 Female
Price From:
£19.95
Rod End Bearing M6 Female
Price From:
£45.95
Eye Bolt M24x2 Male and Lock Nut.
Price From:
£29.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M12 thread.
Price From:
£19.95
Rod End Bearing M12 Male
Price From:
£19.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M6 thread.
Price From:
£159.95
An Active Junction Box for connecting up to 4 Load Cells together as part of one system.
Price From:
£139.95
An Active Junction PCB ONLY for connecting up to 4 Load Cells together as part of one system - No CASE
Price From:
£799.95
Large wall mounted display with extra large Digits for viewing from a distance etc. Visible up to 100m away (200mm digits).
Price From:
£10.00
Transparent Lid for viewing On Board Programmer if fitted.
Price From:
£69.95
Hand Held Programmer and display for load cell amplifier AMP2. Used to programme the amplifier or display the output while connected, with the advantage that the amplifier can be programmed and the hand set removed so that no one else can alter the set up
Price From:
£29.95
On Board Programmer and display.
Price From:
£29.95
An inline cable adapter to allow you to connect a load cell with a Hand Held Display (Amp4) connector to our USB adapter (Amp5). Allowing you to use the load cell with both systems.
Price From:
£19.95
Connector for connecting the load cell to the display.
Price From:
£19.95
Connector for connecting to the RS232 port on the display.
Price From:
£99.95
Recalibration of your load cell. Ranges up to 10 Tonne in Compression or Tension. Calibration (5pts) traceable to National standards
Price From:
£59.95
Calibration (5pts) traceable to National standards. Ranges up to 10 Tonne in Compression or Tension. For new load cell and instrument purchases only.
Price From:
£730.00
Hand held Digital Force Gauge with built in load cell for measuring tension or compression forces. Mounting holes on back allow the gauge to be mounted on test fixture if required. Option of RS232 output enables data to be transferred to PC or printed.
Price From:
£1 199.95
Large Wireless Display with 125mm High Digits for wall mounting etc. Visible up to 60m away.
Price From:
£349.95
Wired Rugged Hand Held Display for use with wired Load Links.
Price From:
£371.00
Calibration to UKAS procedures. We can supply a range of Certified Calibrations Certificates for your load cell or load cell and indicator. UKAS procedures have superseded NAMAS in the force industry. We can also offer ASTM E74 and ISO 376.
Price From:
Call for Pricing
We are also able to undertake customer projects and would be happy to discuss your specific requirements. Please call us on 0118 9310396 for details.
Price From:
Call for Pricing
We are also able to undertake customer projects and would be happy to discuss your specific requirements. Please call us on 0118 9310396 for details.
Recently Viewed Products
- Lemo Connector (Category: S Beam Load Cells)
- Proof Testing ranges up to 12 Tonne (Category: Wireless Load Link)
- USB Load Cell Adapter (Category: Load Cell Displays Amplifiers)
- Large Button Capacity to 20kN (Special) (Category: All Products By Photo)
- Amp4 Spare Connector (Load Cell) (Category: Load Cell Displays Amplifiers)
