Accessories
All our Load Cell accessories in one place!
Price From:
£29.00
If you’re buying a new load cell we can rationalise the output to a specific value (0.0 to 2.200 mV/V) for a given unit of measure (eg 2.000mV/V at 1000kg). Helpful if you don't know how to recalibrate your electronics and just want a matched replacement.
Price From:
£39.95
Load Pad is a soft steel disk which sits between the loading surface and the load cell.
Price From:
£108.75
Group of Adapters for 900 Series.
Price From:
£189.00
The USB Load Cell Module is a high performance digital signal conditioner. Both load cell and electronics are USB powered. The electronics are housed in a rugged metal enclosure. Comes with display and logging software, up to 500 readings/second.
Price From:
£19.00
Range of bow shackles from Crosby.
Price From:
£19.00
Range of D shackles from Crosby.
Price From:
£195.00
A wireless USB receiver module for the PC which will allow you to view and log data from many wireless load cells (using free software). The added advantage of this unit is that it will work in addition to the Hand Held wireless display supplied with the
Price From:
£35.00
If you have an existing AMP1 'All-in-One' Instrument we can upgrade it for you so you don't have to buy a new unit. Add control relays, RS232/485 Comms or Analogue outputs such as 0-10V, +-10V, 0-1mA, 0-20mA, 4-20mA.
Price From:
£89.95
Low Profile Load Cell base for capacities up to 50kN. The base is Stainless Steel and provides the best possible mounting for our size 1 Low Profile Load Cells. The base has the same M20x2.5 central thread detail as the mating Load Cell.
Price From:
£129.95
Low Profile Load Cell base for capacities over 50kN and up to 300kN. Base is Stainless Steel and provides the best possible mounting for our Size 2 Low Profile Load Cells. The base has the same M36x2 central thread detail as the mating Load Cell.
Price From:
£19.95
Low Profile Load Cell Connector.
Price From:
£25.95
Mil Connector with pre wired cable for easy direct connection to our Low Profile Load Cell.
Price From:
£79.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M36x2 thread.
Price From:
£59.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M20x2.5 thread.
Price From:
£29.95
Rod End Bearing M12 Female
Price From:
£19.95
Rod End Bearing M6 Female
Price From:
£45.00
Eye Bolt M24x2 Male and Lock Nut.
Price From:
£29.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M12 thread.
Price From:
£19.95
Rod End Bearing M12 Male
Price From:
£19.95
Stainless Steel Load Button to reduce errors from side loads or misalignment. M6 thread.
Price From:
£19.95
Rod End Bearing M6 Male
Price From:
£795.00
Large wall mounted display with extra large Digits for viewing from a distance etc. Visible up to 100m away (200mm digits).
Price From:
£19.95
Connector for connecting the load cell to the display.
Price From:
£19.95
Connector for connecting to the RS232 port on the display.
Price From:
£19.95
Active USB 2.0 repeater cable which overcomes the maximum 5m length of a standard USB cable. Connect up to 5 cables in series (site/use dependant). No external power required. Length of 5m. No software required. Backwards compatible with USB1.1
Price From:
£59.95
Calibration (5pts) traceable to National standards. Ranges up to 10 Tonne in Compression or Tension. For new load cell and instrument purchases only.
Price From:
£59.00
Set up your load cell and instrument together so they display the correct load in engineering units. Ranges up to 10 Tonne in Compression or Tension. For new load cell and instrument purchases only.
Price From:
£5.95
9 way D connector for connecting the load cell to the USB adapter.
Price From:
£1 195.00
Large Wireless Display with 125mm High Digits for wall mounting etc. Visible up to 60m away.
Price From:
£371.00
Calibration to UKAS procedures. We can supply a range of Certified Calibrations Certificates for your load cell or load cell and indicator. UKAS procedures have superseded NAMAS in the force industry. We can also offer ASTM E74 and ISO 376.
- «« Start
- « Prev
- 1
- Next »
- End »»
Results 1 - 33 of 33
